Product Description
Pioneer Valve supplies the High Pressure 3-Way Ball Valve Q44PEEK 3000PSI, a multi-port ball valve designed for flow bypass and flow joining in demanding industrial piping systems. The valve uses two-sided or four-sided seat configurations, and any port can be used as the inlet without leakage, as stated in the manufacturer's published description. The three flow ways can be produced as L-shaped ports or T-shaped ports to match the required flow path. This high pressure 3-way ball valve controls the flow of air, water, steam, corrosive media, oil, liquid metals, and radioactive media, and it is offered in models Q44PEEK, Q45F, and Q14F with nominal diameters from NPS 1 inch to NPS 8 inch (DN25 to DN200) and an operating pressure range of PN160 - 3000 PSI. Body materials include A105, F304, F316, and F316L, with PTFE, PPL, RTFE, or PEEK seat sealing for high-pressure service. For enterprise customers and system integrators specifying multi-port valves for high-pressure circuits, this Q44PEEK 3-way ball valve is supplied directly from the manufacturer with customization support.
Product type | High Pressure 3-Way Ball Valve |
|---|---|
Model | Q44PEEK/ Q45F/ Q14F |
Nominal diameter | NPS 1"-NPS 8" (DN25-DN200) |
Operating pressure | PN160 - 3000PSI |
Body Material | A105, F304, F316, F316L etc |
Trim material | 304, 316, 316L |
Seat seal material | PTFE, PPL, RTFE, PEEK etc. |
Connecting end | Flange/ Thread |
Design standard | GB/T 12237, ASME B16.34, JIS B2071, DIN 3357 |
Face to face | Pioneer's Design Standard |
End Connection | GB/T 9113, ASME B16.5, JIS B2212, DIN 2542 |
Inspection and test | GB/T 26480, API 598, JIS B2003, DIN 3230 |
Operation device | Handle, worm gear, signal, pneumatic, electric actuator |
Design Feature | 1) Optional Anti-static Device 2) Design as customer's requirement |
The Q44PEEK high pressure 3-way ball valve directs flow through a centrally mounted ball with a machined flow passage. Rotating the ball opens, closes, or switches the flow path among the three ports, so one line can be bypassed or two lines can be joined without stopping the process. The two-sided or four-sided seat arrangement keeps the unused port sealed, which is why any port can be used as the inlet without leakage. L-shaped ports provide diverting between two flow positions, while T-shaped ports allow three-way mixing or distribution, giving process engineers a single-valve solution for common piping arrangements. Because switching is completed by a 90-degree rotation, response is predictable and the valve can be paired with pneumatic, electric, or worm gear actuation according to the duty.
· High pressure capability: rated for an operating pressure range of PN160 - 3000 PSI, with PEEK seat sealing for demanding conditions.
· Multi-port, leak-tight switching: two-sided or four-sided seats allow any port to be used as the inlet without leakage, as published by the manufacturer.
· L-shaped and T-shaped port options: configure the valve for diverting, bypassing, or mixing duties.
· Wide material selection: body options include A105, F304, F316, and F316L; seat options include PTFE, PPL, RTFE, and PEEK.
· Flange or thread connection: connecting ends can be supplied as flange or thread to fit existing piping.
· Optional anti-static device: available where static discharge control is required.
· Customer-specified design: the valve can be designed according to the customer's working conditions.
This high pressure 3-way ball valve is used to control the flow of air, water, steam, corrosive media, oil, liquid metals, and radioactive media. Typical duties include flow bypass circuits and flow joining stations in petrochemical processing, power and energy plants, and other high-pressure fluid systems where multi-port switching is required. Because any port can be used as the inlet without leakage, the valve simplifies piping layout and reduces the number of separate block and bypass valves for commercial users and system integrators, lowering both procurement and installation costs.
Pioneer Valve manufactures high pressure 3-way ball valves and supports enterprise customers with customization, including optional anti-static devices and customer-specified design features. Each valve is inspected to GB/T 26480, API 598, JIS B2003, and DIN 3230, and the technical team assists with model selection, material choice, and actuation requirements from inquiry through delivery. Direct factory supply provides business buyers with consistent quality, competitive pricing, and responsive after-sales support for scheduled and volume orders.
The operating pressure range is PN160 - 3000 PSI. Body and seat materials should be selected according to the actual working pressure, temperature, and media of the application.
Seat seal materials include PTFE, PPL, RTFE, and PEEK. PEEK is commonly specified for high-pressure and high-temperature service conditions.
Yes. The two-sided or four-sided seat design allows any port to be used as the inlet without leakage, as stated in the manufacturer's product description.
Yes. The valve can be designed according to the customer's requirements, and an optional anti-static device is available on request.
