The Signal Thread Ball Valve XPQ11F-2000PSI is a stainless steel thread end ball valve rated for 2000PSI working pressure. It is used to cut off or adjust the direction of the medium in industrial pipelines, and its structure keeps operation and maintenance simple. The valve can be installed on horizontal or vertical pipelines, which is convenient for pneumatic control and electrical control. Plant engineers and industrial buyers select this 2000PSI threaded ball valve where compact inline shutoff, position feedback, and space-saving installation are required.
Product type | Signal Thread Ball Valve |
|---|---|
Model | XPQ11F-2000PSI |
Nominal diameter | DN15~DN200 |
Operating pressure | 2000PSI |
Body Material | CF8, CF3M |
Trim material | 304, 316L |
Seat seal material | PTFE, PPL, RTFE, PEEK etc. |
Connecting end | Threaded/ Welded/ Tri-Clamp |
Design standard | GB/T 12237, ASME B16.34, JIS B2071, DIN 3357 |
Face to face | Pioneer’s design or your requirement |
End Connection | GB/T 9113, ASME B16.5, JIS B2212, DIN 2542 |
Inspection and test | GB/T 26480, API 598, JIS B2003, DIN 3230 |
Operation device | Handle, worm gear, pneumatic, electric actuator |
Design Feature | 1) Flange Hole Can Be Thread Drilling or Through-hole 2) Steam Connection Optional threaded or flange 3) Optional Anti-static Device 4) Optional V-Port Control 5) Design as customer’s requirement |
Like other threaded ball valves, the XPQ11F-2000PSI works on a quarter-turn principle. When the handle, worm gear, or actuator rotates the ball 90 degrees, the ball bore aligns with the pipeline to allow full flow, or turns perpendicular to the flow path to block the medium. This direct operation enables fast shutoff with a small operating torque.
The signal design of this 2000PSI ball valve provides open-close position feedback, which supports pneumatic and electric control in automated process piping. The position signal helps operators confirm the valve state without on-site inspection, which is useful in chemical and water treatment lines where process continuity matters.
The thread end design allows direct connection to threaded piping without flange assembly work. The valve is also offered with welded or tri-clamp connecting ends, so commercial users can match the connection to the site piping standard.
The valve body is available in CF8 or CF3M stainless steel, with 304 or 316L trim, and seat seal options of PTFE, PPL, RTFE, or PEEK. These material choices allow enterprise customers to select a configuration matched to the medium, whether it is water, solvents, acid, natural gas, or oxygen.
Operation devices include handle, worm gear, pneumatic, and electric actuator. Optional anti-static devices and V-port control are available for throttling duty, and the valve can be designed according to customer requirements, including thread-drilled or through-hole flange holes and optional threaded or flanged steam connections.
This signal thread ball valve is applied in industries where 2000PSI shutoff with compact installation is needed:
· Chemical process piping
· Bio-pharmaceutical manufacturing
· Shipbuilding and marine systems
· Coating, oils and fats processing
· Brewing and beverage lines
· Water treatment and HVAC systems
Pioneer Valve manufactures industrial ball valves to international design standards, including GB/T 12237, ASME B16.34, JIS B2071, and DIN 3357. The XPQ11F-2000PSI is inspected and tested according to GB/T 26480, API 598, JIS B2003, and DIN 3230 before delivery. Industrial clients receive body material options, connection choices, and actuation support in one inquiry, with face-to-face dimensions and end connections available on request.
The signal device provides open-close position feedback for the valve, which supports remote monitoring when the valve is operated by a pneumatic or electric actuator.
The valve is applicable to water, solvents, acid, natural gas, oxygen, and similar media, subject to the selected body, trim, and seat seal materials.
Connecting ends include threaded, welded, and tri-clamp. Operation devices include handle, worm gear, pneumatic, and electric actuator.
Design standards include GB/T 12237, ASME B16.34, JIS B2071, and DIN 3357. Inspection and test standards include GB/T 26480, API 598, JIS B2003, and DIN 3230.